3 Most Common Brake Noises: Causes and How to Fix Them
Brake Noises: Annoying or Dangerous?
“My brakes squeak” is one of the most common complaints about brakes. Brake noises can be annoying, but can also alert us of an upcoming danger. It's best to play it safe and have brake noises checked by a trusted mechanic.
I will cover three of the most common brake noises I encounter on a daily basis and try to shed some light on the repair.
Some of the repair techniques I share with you here are unorthodox and you will never find them in a service manual or Technical Service Bulletin. If you decide to try them please be cautious and safe.
Let’s check out the three most common problems that cause noisy brakes.
Common Brake Noises and Their Causes
Stop driving! Usually caused by the brake pad being worn down to nothing.
Thumping from rear
Hard to diagnose, but usually the rear drums.
Either cheap brake pads, or the brake wear indicator is hitting the rotor.
Thumping or squealing
If car is parked outdoors, probably caused by rusted rotors.
You may have picked up a rock.
1. Grinding Noise When You Apply Your Brakes: A Wake-Up Call
Hearing a grinding noise when you apply your brakes is really like hitting a rumble strip on the edge of the highway; if you hear this, you need to wake up and stop driving. A grinding noise on braking is usually caused by a lack of brake pad material; the pads and rotors are now metal to metal, with no braking material left.
Brake pads are like bars of soap. Eventually they get used up, and you have to replace them and spend a little money.
If you don’t, and your brakes get to the point of grinding, just imagine dollar signs rising into the air every time you step on the brake pedal, even just a little. The grinding noise is just a little voice whispering in your ear saying, ”You’re killing me!” Mechanics have an acronym for this, it’s called CPR (calipers, pads, and rotors). And when you get the bill for your brake job, you will need CPR (cardio-pulmonary rescuscitation).
If your brakes are grinding, stop driving and call a tow truck. It’s worth it in the long run.
What Happens When You Let That Grinding Noise Go on Too Long
You are supposed to replace the pads so they don’t grind your rotors down to a tissue. If you replace your pads on time you can often keep your rotors.
Don't Go Cheap on Your Rotors and Pads! They Can Save Your Life!
I have used Callahan rotors and ceramic pads on my kids' cars and on other family members' cars with good results. The quality is almost as good as OEM parts, for a fraction of the price of OEM.
2. Thumping Noise From the Rear When Braking
This brake issue is one that will annoy the hell out of the driver, and suck the life out of the technician. It took me months to figure out what caused this thumping noise in the rear of a vehicle when braking. After tearing apart the rear of the vehicle, lubing every bushing, and checking the clearances of every part imaginable, I came to the conclusion that it’s the rear drums that cause the noise.
Many cars have drum brakes in back, where a shoe stops the car by pressing on the inside of a metal drum. Brake drums, like rotors, get resurfaced once in a while. The cutting bit on the brake lathe removes the old braking surface and leaves a nice new mating surface. During this procedure, the cutting bit will create a groove in the brake drum so slight that the naked eye can’t see it; it’s like a groove on a vinyl record that the needle of the record player follows.
When the brake shoes ride on the new surface, they will follow the groove like the needle of your record player follows a track. If the groove is interrupted, the shoes snap back, hitting the backing plate. This phenomenon happens very quickly, causing a thumping noise that will drive you crazy and wondering if your car is falling apart or even safe to drive.
There are several ways to fix this noise. One is to replace the rear drums. A second way, less drastic, is to remove the drums, install them on a lathe, and sand the crap out of the mating surface with coarse sandpaper. The third way I found by trial and error and pure frustration is a quick fix using the emergency brake.
You will not find this procedure in any service manual or car repair manual, not even on car repair talk radio. It can be dangerous if not performed correctly so please be careful. Nevertheless, I have done it on over 100 cars, including family members’ cars, and I would not recommend it if I thought it damaged the vehicle.
How this works is that you get your rear brakes to do 100% of the braking for a few seconds at a time, instead of their usual 30%, and this will cause the brake shoes to polish the grooves out of the drum. For safety reasons, only try this on cars that have an emergency brake handle in the center console; emergency brakes that come up out of the floor can’t be set and released quickly enough.
Drive your car in a remote area with little or no traffic at a speed of about 40 miles an hour. Lightly pull up on the emergency brake handle while holding the release button; this is so the emergency brake handle won’t lock in the braking position, and you can release it quickly. Only hold the emergency brake on for about three seconds because you don’t want to overheat the drums. Do this three to five times, while keeping a steady speed; the noise should disappear, or at least be 90% gone. Then drive the car at normal speeds and use the brakes the way you normally would.
If the noise has not changed, you may have a different thumping noise than what I have described here in this article. Give up on this remedy and try something else.
My sister came to me with this noise after she had her brakes checked at her local garage. They had adjusted her rear brakes so the emergency brake handle had less free play in it, and this is when her troubles began. I took her car out on a test drive for about 10 minutes, performed the procedure described here, and poof, the noise was gone. She was happy because the garage that had caused the noise had no idea how to fix it.
3. "My Brakes Squeak"
A brake squeak can be very annoying, and furthermore might mean something. It may be a sign of danger of some kind, or it may just be a sign of cheap brake pads.
The most common brake squeak is caused by inferior pads. A cheap brake job sounds good when you’re paying for it, but it may come with years of painfully annoying brake squeaks. Cheap brake pads have large metal flakes in the brake material, and when you press the brakes lightly and a flake drags along the rotor, it will squeak. The squeak may go away when that particular flake wears away, but usually there is another metal flake right behind it. The best way to avoid this type of noise is to choose quality brake pads.
If your brakes are squeaking or squealing while driving down the road, but the noise goes away when you press on the brakes, I have a hunch that your brake wear indicator is hitting the rotor and causing the noise. The wear indicator is a small metal tab fastened to the brake pad. When the brake pads are worn down and need replacing, this metal tab starts to drag along the rotor, warning the driver of the potential problem. Don’t ignore the noise too long; the brake pads are thin and need servicing very soon, for safety and to protect the other parts of the braking system.
Bonus Noise: Thumping or Squealing Caused by Rotors Rusting Overnight
Especially in cars parked outdoors, rust can build up overnight on the rotor around the impression of the pad, causing a thumping or squealing when you drive the car away in the morning.
Noises Caused by Rust on Rotors
A Bonus Noise From the Brake Area
I have one other noise I run into a lot that has nothing to do with the brakes themselves—technically, it has to do with rotors—but I thought it was worth mentioning here because it comes from that area, and a lot of customers assume it's their brakes causing the noise. If your vehicle makes a scraping noise, while driving or when turning a corner, that sounds like something being dragged across a tin plate, it's possible you have picked up a rock from a dirt road or from a freshly repaired pothole: the kind of place where you hear a shower of pebbles hitting the bottom of your car as you drive through. There’s a good possibility that a rock has gotten lodged between the rotor and the backing plate, making an awful noise that is causing your ears to bleed. Just have the rock removed and be on your way.
Or sometimes the backing plate behind the rotor gets bent while the car is being worked on, and it scrapes against the rotor.
A Rock Stuck Next to the Rotor
There's an easier way to remove a rock stuck behind the rotor: bend the backing plate a little, as shown in the video below!
Scraping Noise From Behind Rotor
I sincerely hope that all the information here will help diagnose that noise that seems to be coming from your brakes. I know that some of my methods are a bit out of the box, but it's what we do sometimes to repair vehicles. There is always a better way, but if you don't try new ideas, you'll never discover it. A wise man once said, "If you do the same things over and over, expecting different results, you must be crazy."
For a couple of other common car noises, see the video below.
Three Common Car Noises
The video above describes three noises: squeaking from brake pad wear indicators; a clicking in the front end combined with a shaking steering wheel; and a metallic, knocking noise that happens in the front end while turning.
Car Brake Noises
What Noises Do Brakes Make: FAQ’s
How Do I Get My Brakes to Stop Squeaking?
The most common way to stop brakes from squeaking is to remove all the brake pads, disassemble the calipers, and lubricate all moving caliper parts with high temperature grease and all caliper-to-brake pad contact points with brake pad lube.
There are other methods out there, like sanding the brake pad surface or shaving the leading edge of the brake pads, but the repair above has the best results by far.
Why Are My Brand New Brakes Squealing?
The most likely cause for new brake pads squeaking is lack of lubrication on the caliper-to-pad contact points, most likely from an inexperienced mechanic.
Some aftermarket brake pads have a high content of "bimetal" material which can cause new brakes to squeak as well.
What Can Cause a Grinding Noise in the Braking System?
A grinding noise can be heard in a brake system when the pad's life is exhausted, that is, when it's worn out.
Another cause of grinding in a brake system is moisture on the rotor after sitting over night, but this will usually disappear after applying the brake a few times.
Another common grinding noise from brakes happens when small pebbles get caught between the rotor and rotor backing plate, or the backing plate is touching the rotor after a brake service was just done or the wheels were just removed from the vehicle.
How Much Does It Cost to Get a Brake Job?
Brake jobs can range between $150 to $650 per axle depending on what is wrong and what needs to be replaced. If your vehicle need to have the rotor and pads replaced, this is when the brake job becomes more pricey.
If you hear that the rotors need to be replaced, ask the mechanic if they can resurface them to save a few bucks. Resurfacing them, if he can do it, could actually save you about $100 - $150.
How Much Does it Cost to Fix Squeaky Brakes?
The cost to fix squeaky brakes can vary depending on the labor rate and on what the mechanic needs to do to stop the squeak. It will cost about one hour of labor per axle to disassemble the brake calipers and lube all moving parts and pads.
Why Do My Brakes Squeak First Thing in the Morning?
The main reason brakes squeak first thing in the morning, or after the car has been sitting in a humid area, is moisture on the brake rotors. Usually this type of brake squeak will disappear after applying the brakes a few times.
Can Your Brakes Squeal When Not Applied?
Your brakes can squeal when they are not applied. Usually this is because the brake pad wear indicator is touching the rotor. If the wear indicator is touching the rotor, sometimes the noise disappears when you apply the brakes, and returns when your foot comes off the pedal.
If you hear this type of noise when you're not applying the brakes, have a mechanic do a brake inspection just to be on the safe side. The wear indicator may be warning you that your brake pads are getting low and need to be replaced soon.
Do You Have to Break in New Brake Pads?
You should not have to break in new brake pads; you should be able to drive normally as soon as the brake pads are installed.
What is the Grinding Noise When I Drive?
If you're hearing a grinding noise when you drive, and you're not applying the brakes, it could be that the brake pads are worn metal to metal. They should be inspected ASAP! Your brakes may be worn away to nothing.
How Do You Check Your Rotors?
Rotors are inspected visually and with measuring tools like a micrometer or a Verner caliper. The visual inspection checks for flaking rust on the braking surface, score marks on the braking surface, heat cracks, and hot spots.
Measuring the rotor thickness is important when doing the brake inspection. If the rotor is too thin, the rotor could crack or fall apart when braking under severe conditions. Another reason to measure rotor thickness is to verify there is enough material to resurface the rotors.
How Long Do Brakes on a Car Last?
It all depends on driving habits and conditions. If you drive on the highway all the time, your brakes could last up to 100,000 miles. But if you use your vehicle to make deliveries in the city, you could find yourself replacing brakes every 15,000 miles.
How Long Does it Take to Get a Brake Job?
A typical brake job takes about one to two hours. If they are replacing rotors and pads, it will take about an hour per axle. If they are machining or resurfacing the rotors, it will take a bit longer.
How Often Do You Need to Change Brake Pads?
It all depends on driving habits and conditions. If you drive on the highway all the time, your brakes could last up to 100,000 miles; but if you use your vehicle to make deliveries in the city, you could find yourself replacing brakes every 15,000 miles
Another thing to consider is the type of brake pad you're installing. Some aftermarket pads are very cheap and will not last long. Cheap pads also tend to be very squeaky.
What Causes Brake Noise
More on Brakes by Eddie Carrara
- How to Replace Honda Brake Pads: Tips and Precautions
Avoid making costly mistakes when you're replacing brake pads on your Honda. Important steps that backyard mechanics might skip.
- Four Common Brake Squeaks
If your brakes squeak, and you need help trying to figure out what's causing it, maybe I can help! Here are four common brake squeaks to compare to. Questions are welcome!
- Brake Problems? Five Common Brake Problems In Cars
Education for a driver who knows very little about a car's braking system, and possibly help for a technician who is having trouble diagnosing a brake issue.
Please Do Us a Favor
I need to ask you for a favor. If you found this information useful, please share it. If you still have questions, help us out by describing them below. All questions are welcome.
Questions & Answers
I hear a loud scraping noise when I am slowing down. When I am going fast and apply the brakes, I hear no noise at all, but the slower I get, the louder the noise gets. It sounds like it is coming from the front driver side tire. It is not a very tinny noise like the above video states, but more of a loud grinding sound. Any ideas?Helpful 40
When driving my Nissan Almera, I hear a terrible grinding sound. Is this something to do with brakes or bearings?
If you hear the noise when braking, most likely it's your brakes, if it makes noise while driving above 50 mph and it sounds like a hum noise it may be a wheel bearing starting to make noise.Helpful 9
I just did a complete brake pad and rotor change for my 2010 Dodge Charger because when I drive on the highway and brake, the whole car will start to shake. The problem stopped for a bit, but now it starting to do the same. Can you offer any solution to my problem?
Two possibilities may be causing your problem. When changing the rotors, the hub surface where the rotor sits has to be clean and free of any debris at all like rust or corrosion; the rotor will not lie flat and will eventually start to warp again. The other problem could be your wheel lug nut torque, if the lug nuts are over tightened it can cause the rotors to warp.
I replaced all breaks, rotors and greased everything but I am still hearing a noise like the brake pads are bad. The noise is apparent while driving at any speed and when applying the brake. Any other thoughts?
Most likely your anti rattle clip is not centered in the caliper holder. I recommend taking the brake pads back out on the Side you hear the noise and check the shims/clips, look for any rub marks on the rotor and shims.Helpful 3
I had my brakes replaced on my 2006 Sebring. The brakes have been squeaking since I picked up my car. I was told to drive it a bit since the sound may go away. I drove it on the highway this weekend, and most of the squeaking has disappeared except when I brake at low speeds. Should I be concerned?