Use a Car Battery Hydrometer to Spot an Undercharged or Failing Battery

Updated on July 15, 2016
A bad car battery may be hard to diagnose at times.
A bad car battery may be hard to diagnose at times. | Source

A car battery hydrometer comes in handy when facing charging or power issues. If your battery discharges from time to time, suddenly dies or makes it hard to start your vehicle, a hydrometer will tell you if your battery is actually charged, needs a charge, or it's time for a replacement.

On a free-maintenance type battery you know its condition by the color of its eye indicator. But a maintenance-type battery will leave you puzzled when you find no physical signs of problems like damage or corrosion.

Doing a simple hydrometer check will reveal the overall condition of your maintenance-type battery in minutes.

So, let's see in what shape is your battery. But first, you need to have a basic idea about what a battery hydrometer is, how to choose one, how to go about doing the actual test and interpreting your results.

What is a Hydrometer?

A hydrometer is an inexpensive, user-friendly, and readily available tool at most auto parts stores. You use a car battery hydrometer to measure the specific gravity — density or weight — of the electrolyte inside your battery to know if your battery is fully charged, needs a charge, or one or more cells have failed.

It's good that a hydrometer can tell you this information about your battery, but it's also interesting to learn how the tool knows the state of health of your battery. So here's a short explanation.

Electrolyte is made up of 35% sulfuric acid and 65% water. The electrolyte's chemical composition has a greater gravity than that of plain water. For measurement purposes, water is said to have a density of 1.000 when compared to electrolyte. Electrolyte, in a fully charged battery, has a specific gravity of 1.265 at a temperature of 80 F (26.67 C).

Overtime, conditions affecting your battery operation — or simple wear of internal components — will cause sulfur molecules to move towards the internal battery plates, discharging the battery and reducing electrolyte gravity. When battery conditions improve so to speak, those same sulfur molecules move back into the electrolyte, recharging your battery and increasing electrolyte weight. However, when enough sulfur makes it into the plates without being able to move back into the electrolyte, your battery becomes discharged. You'll know this because the electrolyte specific gravity will be at about 1.140. And a hydrometer will give you this information.

But more than the condition of the electrolyte in a particular battery cell, it is the condition of the electrolyte in a cell compartment with respect to the others that will tell you whether your battery is charged, needs a charge, or has degraded, as we'll see later.

Using a Car Battery Hydrometer

What Type of Hydrometer Should I Use?

A common hydrometer is made up of a glass tube — or similar container — with a small, graduated float or capsule — usually with a range of between 1.100 and 1.300. It comes fitted with a rubber bulb at one end and, sometimes, a small rubber hose on the other end. However, not all hydrometer configurations are equally efficient.

Look for a hydrometer with a built-in thermometer. A hydrometer scale is based on an 80 F (26.67 C) temperature. As the electrolyte temperature drops, the specific gravity increases. And the opposite is true as well. So you need the thermometer to compensate for different electrolyte temperatures during the time of reading. This type of hydrometer usually comes with a conversion table to help you adjust your readings.

You may find a hydrometer without an integrated thermometer, but this is dangerous for one main reason: You, or someone else, may decide to use that old metal thermometer to get the electrolyte temperature.

Don't do it!

Submerging a metal thermometer in the electrolyte creates an adverse chemical reaction and may cause your battery to explode. You can actually die.

Also, try to buy a quality hydrometer with a glass tube and floating capsule. The dial — swinging arm — and floating disk types stick at times and cause you to misread the actual electrolyte density. If possible, read customers' reviews on the particular tool you're interested.


Don't use a metal thermometer on your battery electrolyte. Your battery may explode!

A hydrometer can measure the specific gravity of different types of liquids.
A hydrometer can measure the specific gravity of different types of liquids. | Source

Car Battery Hydrometer


Hydrometer, large glass with temperature compensating float.


Preparing Your Battery for a Hydrometer Reading

Before you conduct your tests, you need to make some preparations.

Remove dirt and buildup from the battery top, if necessary. Use a solution of 8 ounces of warm water and 1 tablespoon of baking soda. Put on your acid resistant gloves and goggles. Then, apply the solution to the battery top and sides with a soft brush and wipe the solution with a clean rag or paper towel. Just don't let the solution get under the caps or it'll ruin the electrolyte.

Next, remove the battery caps using a standard screwdriver. Check that the electrolyte reaches the bottom of the filler rings. If necessary, add distilled water to bring the electrolyte to the correct level, and allow the battery to go through a charge and discharge cycle to mix the water thoroughly. For this, drive around and run some errands.

Also, if your battery is discharged, try to slow-charge it. This will not only discard the possibility of a charging issue, but will help restore battery internal properties. If your battery doesn't take the charge, you've found your problem and need to replace it.

Using a Ball-type Hydrometer

How to do a Hydrometer Check

Once your battery has met the conditions described in the previous section, it's time to read your electrolyte density. The best time to check the state of charge of your battery is when your battery is showing signs of trouble. This will help potential bad battery cells to 'surface' through the electrolyte gravity readings.

Always follow the instructions that come with your particular tool. Still, here are some suggestions and a general description of the steps you'll take when doing a hydrometer test on your battery.

1. Put on your acid-resistant gloves and goggles.

2. Remove the caps from the battery top, squeeze the hydrometer rubber bulb and submerge the tip into the electrolyte.

3. Release the bulb and let some electrolyte to enter the hydrometer container. Check the electrolyte color. You should be able to see through the colorless liquid. If the electrolyte has a grayish tint, either a cell has degraded, or your battery has reached the end of its service life. Consult with a battery shop, if you need more information.

4. Allow the liquid to sit inside the glass tube for a few seconds, and then release it back into the battery. Repeat this four or five times to get the thermometer up to speed with the electrolyte temperature.

5. Draw electrolyte into the hydrometer once more, starting with the first cell on either side of the battery. Make sure to pull enough of the liquid so the float in the hydrometer reaches around the center of the container and moves freely.

6. Maintain the hydrometer in a vertical position, and raise it to eye level.

7. To read the electrolyte specific gravity, read the number on the float's scale that intersects the surface level of the electrolyte. Jot down your reading on a piece of paper. If you have a ball — or needle-type — hydrometer, follow the instructions on your tool's package for the reading.

8. Get the temperature from the thermometer. Use the conversion table on your tool to adjust your reading. Add or subtract four points (.004) to your reading for every 10 F (6 C) registered above or below 80 F (27 C). For example, if the temperature on your thermometer is 93 F and your gravity reading is 1.210, adjust your reading to 1.214. If the temperature on your thermometer is 65 F and your gravity reading is 1.210, adjust your reading to 1.206. Follow the instructions that came with your tool to adjust your readings. Also, see the temperature conversion table below.

9. Next, read the rest of the cells and take note of each reading.

Temperature Compensation Table

Reading Adjustment

Hydrometer Check Reading Results

Now, compare your readings you got from every cell:

* If the electrolyte in every cell has an equal or almost equal specific gravity of around 1.265, your battery is fully charged.

* If the electrolyte in every cell has a specific gravity below 1.265, but the readings fall within less than 25 points from each other, you may restore battery power with a slow or trickle charge.

NOTE: If you are conducting a hydrometer check because of battery charge issues, unless your tests indicate a bad cell your problems may lie somewhere else:

- You may have problems in the starting system
- Corrosion is setting in between the battery posts and terminals or some other connection on the starting circuit.
- You may have a loose connection in the starting circuit
- You may have charging system problems.
- You may be dealing with a parasitic draw

* If anyone of your readings has a difference of 25 to 50 points with respect to any other of your readings (for example, 1.190 and 1.220), most likely you are dealing with a bad cell or your battery has reached the end of its service life.

Add distilled water to bring the electrolyte to the correct level.
Add distilled water to bring the electrolyte to the correct level. | Source

A car battery hydrometer is an excellent way to determine the state of health of your battery and will save you money on unnecessary replacements. But it won't help you to extend its service life by itself. Car batteries need regular attention. Check your battery regularly and keep the terminals free of corrosion; remove dirt and buildup from the case and tray; check and keep the electrolyte at the correct level; keep the hold-down mechanism in good condition and firmly holding the battery in place.


    0 of 8192 characters used
    Post Comment

    No comments yet.


    This website uses cookies

    As a user in the EEA, your approval is needed on a few things. To provide a better website experience, uses cookies (and other similar technologies) and may collect, process, and share personal data. Please choose which areas of our service you consent to our doing so.

    For more information on managing or withdrawing consents and how we handle data, visit our Privacy Policy at:

    Show Details
    HubPages Device IDThis is used to identify particular browsers or devices when the access the service, and is used for security reasons.
    LoginThis is necessary to sign in to the HubPages Service.
    Google RecaptchaThis is used to prevent bots and spam. (Privacy Policy)
    AkismetThis is used to detect comment spam. (Privacy Policy)
    HubPages Google AnalyticsThis is used to provide data on traffic to our website, all personally identifyable data is anonymized. (Privacy Policy)
    HubPages Traffic PixelThis is used to collect data on traffic to articles and other pages on our site. Unless you are signed in to a HubPages account, all personally identifiable information is anonymized.
    Amazon Web ServicesThis is a cloud services platform that we used to host our service. (Privacy Policy)
    CloudflareThis is a cloud CDN service that we use to efficiently deliver files required for our service to operate such as javascript, cascading style sheets, images, and videos. (Privacy Policy)
    Google Hosted LibrariesJavascript software libraries such as jQuery are loaded at endpoints on the or domains, for performance and efficiency reasons. (Privacy Policy)
    Google Custom SearchThis is feature allows you to search the site. (Privacy Policy)
    Google MapsSome articles have Google Maps embedded in them. (Privacy Policy)
    Google ChartsThis is used to display charts and graphs on articles and the author center. (Privacy Policy)
    Google AdSense Host APIThis service allows you to sign up for or associate a Google AdSense account with HubPages, so that you can earn money from ads on your articles. No data is shared unless you engage with this feature. (Privacy Policy)
    Google YouTubeSome articles have YouTube videos embedded in them. (Privacy Policy)
    VimeoSome articles have Vimeo videos embedded in them. (Privacy Policy)
    PaypalThis is used for a registered author who enrolls in the HubPages Earnings program and requests to be paid via PayPal. No data is shared with Paypal unless you engage with this feature. (Privacy Policy)
    Facebook LoginYou can use this to streamline signing up for, or signing in to your Hubpages account. No data is shared with Facebook unless you engage with this feature. (Privacy Policy)
    MavenThis supports the Maven widget and search functionality. (Privacy Policy)
    Google AdSenseThis is an ad network. (Privacy Policy)
    Google DoubleClickGoogle provides ad serving technology and runs an ad network. (Privacy Policy)
    Index ExchangeThis is an ad network. (Privacy Policy)
    SovrnThis is an ad network. (Privacy Policy)
    Facebook AdsThis is an ad network. (Privacy Policy)
    Amazon Unified Ad MarketplaceThis is an ad network. (Privacy Policy)
    AppNexusThis is an ad network. (Privacy Policy)
    OpenxThis is an ad network. (Privacy Policy)
    Rubicon ProjectThis is an ad network. (Privacy Policy)
    TripleLiftThis is an ad network. (Privacy Policy)
    Say MediaWe partner with Say Media to deliver ad campaigns on our sites. (Privacy Policy)
    Remarketing PixelsWe may use remarketing pixels from advertising networks such as Google AdWords, Bing Ads, and Facebook in order to advertise the HubPages Service to people that have visited our sites.
    Conversion Tracking PixelsWe may use conversion tracking pixels from advertising networks such as Google AdWords, Bing Ads, and Facebook in order to identify when an advertisement has successfully resulted in the desired action, such as signing up for the HubPages Service or publishing an article on the HubPages Service.
    Author Google AnalyticsThis is used to provide traffic data and reports to the authors of articles on the HubPages Service. (Privacy Policy)
    ComscoreComScore is a media measurement and analytics company providing marketing data and analytics to enterprises, media and advertising agencies, and publishers. Non-consent will result in ComScore only processing obfuscated personal data. (Privacy Policy)
    Amazon Tracking PixelSome articles display amazon products as part of the Amazon Affiliate program, this pixel provides traffic statistics for those products (Privacy Policy)